|
Feature
Intel
Pentium®4 Processor
(Northwood/Prescott)
Socket 478 with FSB
400/533/800/1000+(by
overclocking) MHz
3 DDR266/333/400 Memory
Sockets
6 Channel AC97 Audio
3Com 10/100 Ethernet LAN
2 Serial ATA150 Channels,
2 ATA100 Channels, up to 4 ATA
100 IDE Devices
6 USB 2.0/1.1 Ports (4 ports
by optional cable)
Processor
Socket
478 Intel Pentium® 4
Processor (Northwood/Prescott)
FSB
400/533/800/1000+(by
overclocking) MHz
Chipset
North
Bridge : Intel 848P
South Bridge : Intel ICH5
LAN Chip : 3Com 3C910-A01
Audio Codec : Realtek ALC655
I/O Chip: Winbond Smart I/O
W83627HF
Memory
3
* DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR
SDRAM up to 2 GB
( DIMM1 uses 2 Banks/ DIMM2
& DIMM3 share 2 Banks )
Note 1: If the FSB of your CPU
is 400 MHz, the memory speed
supports only DDR 266.
Note 2: If the FSB of your CPU
is 533 MHz, the memory speed
supports DDR 266/333
Note 3: If the FSB of your CPU
is 800 MHz, the memory speed
supports DDR 266/333/400
Expansion
Slots
1
x AGP(3.0) 8X slot (1.5V only)
5 x PCI slots (PCI 2.3
compliant)
IDE
Connectors
2
ATA100/66 Channels, up to 4
ATA 66/100 IDE devices
Onboard
I/O Connectors
1
x Floppy Connector
2 x USB 2.0/1.1 header (4
ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header
(S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan
rotation detection function )
2 x System fan headers ( 2 fan
rotation detection function )
2 x 5 pin system panel header
(Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel
spec)
1 x IrDA header
1 x Case Open detection header
I/O
via Back Panel
PS/2
keyboard/mouse, 2 x
USB(2.0/1.1), RJ45,2 x
Com(serial), 1 x Parallel,
1xLine-in/Line-out(Speaker
Out)/MIC
Power
20-pin
ATX power connector, 4-pin ATX
12V power connector
BIOS
Feature
3Mb
Flash EEPROM
Award BIOS with ACPI, DMI2.0,
PnP, WfM2.0, Green Suspend to
RAM (S3), Suspend to Disk (S4)
Wake on keyboard/mouse, Wake
on LAN/RTC Timer
Hardware
Monitoring
3
FAN sensors, CPU/System
voltages and temperature
monitoring
Special
Feature
Zero
Jumper Design
Adjustable CPU frequency by 1
MHz increment, Adjustable Vcore,
VAGP, VMemory
for overclocking
Watch Dog Timer (auto-reset
system when it can not handle
overclock configurations)
AGP Protection ( The AGP
Protection can ensure the AGP
card voltage to be 1.5V, to
protect the mainboard and the
AGP card )
Certifications
FCC,
CE, BSMI
Form
Factor
ATX
(305mm x 218mm)
|