|
PROCESSORS
One Socket 478 supports
the
-Intel
Pentium 4 processor up to 533MHz FSB
Chipset
SiS
648 & 963 chipset with following features:
-Integrated USB2.0 Host Controller
Xabre
200 GPU
-Built-in 256-bit 3D/2D engine
-AGP8X transfer mode
-Build-in 375MHz RAMDAC
-DirectX8.1 compliant, with hardware pixel
shader
64MB Display memory
-Eight 4Mx16 bit chips
-200MHz memory clock
LPC
I/O – ITE IT8705F
System Hardware Monitor:
Integrated in ITE IT8705F
LAN – VIA VT6103
(optional)
Audio – AC ’97
Codec CMI9739 6 channel
IEEE 1394A - RTL8801B (Optional)
System
BIOS
AMI 2Mb Flash ROM
Supports Plug and Play
1.0A, APM 1.2, Multi Boot, DMI
Support ACPI revision 1.0
specification
Memory
2
DDR DIMM Sockets support
- Two
184-pin 2.5V DDR SDRAM (DDR200/266/333/400)
Maximum:
2GB
Expansion
Slots
3 PCI slots, 1 CNR slot
Form
Factor & Layers
ATX
(305mm*244mm), 4 Layers
|
I/O
Interface
Back Panel I/O Ports
-PS/2
keyboard and mouse connectors
-Four USB2.0 Ports and a LAN connector
-One EPP/ECP mode parallel port
-One 16550 high-speed serial I/O port
-One VGA connector
-Audio ports (Mic, Audio-in, and Audio-out)
-One RJ45 LAN port (optional)
-one IEEE 1394 port (optional)
Dual
PCI IDE interfaces - support four IDE devices
(PIO mode 4, DMA Mode 2, Ultra DMA 100/133)
Supports 360K~2.88M Byte,
3 Mode FDDs or LS120
ATX Power Supply
Connector
Ports, headers and others
-IrDA header
-Internal PC speaker header
-CD ROM/DVD Audio Input header
-2 Extra USB Ports
-1 Extra IEEE 1394a Port
-HDD LED, Reset Switch, Suspend LED, Power
Switch headers
-CPU and Chassis Fan headers
-Wake on Lan header
RTC
& Battery
Integrate CMOS SRAM in
SiS963
With CMOS hardware clear
jumper
special
features
Supports Wake on LAN, Wake on
Modem, Interrupt Wake-Up from Keyboard/Mouse,
and Keyboard Power ON, Back Panel USB
Keyboard/Mouse Power ON
|
.gif)
